Dell Inspiron 16 2-in-1 (7620)
| Hardware | PCI/USB ID | Working? |
|---|---|---|
| Touchpad | Yes | |
| Keyboard | Yes | |
| GPU (Intel) | 8086:46a6 | Yes |
| GPU (NVIDIA) | 10de:1f9f | Yes |
| Webcam | 0c45:673f | Yes |
| Bluetooth | 8087:0033 | Yes |
| SD-card reader | 05e3:0761 | Yes |
| Audio | 8086:51c8 | Yes |
| Wi-Fi | 8086:51f0 | Yes |
| Fingerprint reader | 27c6:639c | Yes |
| Ambient light sensor | Yes | |
| TPM | Untested |
Installation
Before installing it is necessary to modify some UEFI Settings. They can be accessed with F2 when booting.
- Change the SATA Mode from the default "RAID" to "AHCI". This will allow Linux to detect the NVMe SSD and manage its power.
- Disable Secure Boot. This may be re-enabled at a later point. See Secure Boot#Using a signed boot loader.
Dual boot
Please note that changing from "RAID" to "AHCI" can break the default Windows installation and require a complete reinstall. Usually running windows own startup repair utility however fixes this issue in most cases. Another alternative is to follow this guide.
The reinstall can be done through the Dell recovery in the UEFI if needed.
Once you used the startup repair utility or have reinstalled, Windows should boot normally in AHCI mode and without error. Then one can proceed with typical dual boot setup.
Power Management
See Hibernation for kernel parameters & initramfs configuration.
S3 Sleep is not supported. S0ix however works reasonably, losing roughly 0.5% battery per hour. Sata mode "RAID" needs to be changed to "AHCI" for S0ix to work. Without S0ix activated the laptop looses around 2% battery per hour.
Both NVIDIA's proprietary driver and nouveau reliably disable the NVIDIA card.
Fingerprint reader
Works well after enrollment with fprint.